Shishido electrostatic, ltd., ESD solutions and productions.
Attenuation meter, electrified charge attenuation measuring instrument.
Static honestmeter H-0110
Honest data analyzing system V2
Static honestmeter H-0110-S4 :
The STATIC HONESTMETER H-0110-S4 is an instrument designed to measure the attenuation of static electricity, and is the ideal device for measuring the diffusibility of static in materials. This device is used to charge the sample by irradiating it with air ions generated by a corona discharge, and, after irradiation has stopped, to measure the static decay curve.
●Safety cover is now Standard accessory with Safety Interlocked function.
●Please specify either 50 or 60 Hz.
●Only AC100V available!
If necessary, we will provide Stable transformer with AC100V output.
Honest data analyzing system V2-S4 :
Main FeaturesThe HONEST DATA ANALYZING SYSTEM V2-S1 is an analysis and calculation device designed to automatically calculate the half life of the voltage decay from the static decay curve obtained from the HONESTMETER device. The attenuation of materials can be automatically measured by a one-touch operation.
●Decay rate setting: 2~100% decay.
●Digital data storage (CSV file data).
●Automatically operation.
Model | H-0110-S4 |
The height of static honestmeter probe | Standard : 20mm. The probe size can be changed to 15mm to meet the Japanese industrial standard (JIS). Please specify this at the time of order. |
Input voltage | AC100 V±10%(50/60 Hz)※1 |
Capacity | 100VA |
High voltage and power supply output | H.V(applied voltage for corona discharge):0~10kV CAL(applied voltage for calibration):0~3kV |
Operating Environment | temperature:0~40℃ humidity:20~90%RH (non-condensing) |
Output signals | ANALYZER terminal: for V2-S1 SYNC terminal: for the oscilloscope Voltage: 0 to ±10V Accuracy: Approx. 10% |
Main unit dimensions | 420×600×280mm(W×H×D) |
Weight | A.pprox. 33kg |
Accessories | Power supply cord, signal cable calibration jig and balancer(one set) hexagonal wrenches(2), 2A fuse(3) |
Model | V2-S1 |
Input voltage | AC100 V±10% (50/60Hz) ※1 |
Capacity | 0.5VA |
Main unit dimensions | 300×250×100mm(W×H×D) |
Weight | 1kg |
Interface | DOS/V computer with a USB interface (only support to 1 PC) |
Supported model | Intel Pentium 500 MHz or faster (or equivalent) |
At least 128 MB of memory recommended, depending on the capacity required by the OS |
|
Hard disk drive (HDD): At least 2 GB of available space | |
Screen resolution: 1024 × 768 or greater recommended | |
Operating systems (OS) | • Windows XP |
• Windows Vista | |
• Windows 7(32 or 64 bit) | |
• Windows 8 | |
Accessories | Power supply cord, connection cable USB cable, Temperature/humidity sensor, CD-ROM(Manual and drivers), Stand |