Shishido electrostatic, ltd., ESD solutions and productions.
SHOETESTERⅡ antistatic shoe leakage measuring instrument.
Resistance meter.
The SHOE TESTER is a dedicated measuring instrument that measures the electrical resistance of antistatic shoes designed to eliminate static electricity from the human body, while the shoes are being worn. To perform measurement, the person wearing the shoes stands on the base and operates the instrument simply by pressing the touch panel with one finger.
A resistance of 100 MΩ or less to ground is required to eliminate static electricity from the human body, and at least 0.1 MΩ is desired for the prevention of electrical shock. Since the resistance of the shoes will vary depending on the temperature and humidity, dirt on the shoe soles, and friction, periodic measurement and maintenance is required.
●The main unit and footplate are provided as separate units, and the main unit can mounted on the wall, placed on a table, or integrated with the stand as required.
●The buzzer can be switched to ON or OFF.
●A 1-MΩ check function is built in.
●It can be send the data with RC232C port.
●Support pole is optional.
Application example :
●Semiconductor manufacturing plants.
●Paint plants.
●Plants where hazardous products such as solvents or powder are handled and the wearing of antistatic shoes is required.
| Model | SHOETESTERⅡ |
|---|---|
| Measurment voltage | DC10V |
| Measurment accuracy | ±10% rdg ＋2 digit |
| Measuring Range | 0.00～200.0MΩ |
| Display | 4 digit display by Red LED. |
| Upper limit value | 1，5、10，20，35，50，100（MΩ） |
| Lower limit value | 0.1，0.5、1，5，10（MΩ）switchable switchable |
| Alarm | If the measured value is within range: OK light (green) If the measured value exceeds the maximum value: HI light (red) If the measured value is under the minimum value: LOW light (red) |
| Alarm output | While it is higher than upper limit or lower than lower limit, output signal OK/NG from connect port (NO / NC) |
| Self-checking founction |
Ohm self check button, 0.95 to 1.05MΩ (Display green)） |
| Power supply | DC12V（AC adapter（OPSHT2-ADA）AC100V～240V 50/60Hz） |
| Operating enviromnet | 0～40℃ |
| Dimensions | Main unit：170×140×37mm （W×D×H） Measurement stand：310×350×27mm（W×D×H） |
| Weight | Main unit：0.9kg Measurement stand：4.5kg |
| Attachment | instructions, measurement stand, fixing stay for wall-mounted, ground wire, cover for dust protecting, AC adapter, measuring cable for signal |
| Option | Support pole with amgle adjustment function: OPSHT2-PA OK/NG signal cable: OPSHT2-SCA RS-232C cable: OPSHT2-RCA |
