Shishido electrostatic, ltd., ESD solutions and productions.
Eliminostat AT-10, SAT-11, SAT-20, SAT-30 series..
High voltage AC power supply.
●The ELIMINOSTAT SAT Series comprises a static-eliminating electrode, a high-voltage power supply, high voltage cables and a high-voltage branch box for connecting the system units.
The SAT Series static eliminators are provided with a safety device that meets standards proscribed under the Product Liability Law.
This safety device incorporated in the SAT Series high-voltage power supplies is an over-current protector that cuts off the high-voltage power supply when an abnormal current is detected in the electrode or in the high-voltage cables.
●The SAT Series static eliminators use the AC corona discharge method to provide a stable static elimination performance and a good balance between the positive and negative ions.
●The high-voltage power supplies incorporate a safety device that meets standards proscribed under the Product Liability Law to maintain high reliability (a safety device is not provided with the AT-10).
●The safety device uses an extremely high-precision method that detects an over-current in the secondary high-voltage transformer circuit. If an abnormal current leakage is detected in the static-eliminating electrode or a high-voltage cable, the safety device cuts off the high-voltage power supply and displays an alarm.
●Shielded cables are used for the high-voltage cables to reduce the generation of noise.
●The SAT Series high-voltage power supplies can be combined with any of the bar, point, or air electrodes offered.
Model | AT-10 (Discontinued) | |
Input power supply | AC110-120、220-240V | |
(switch-selectable) | ||
Power cable | 1.8m 2P plug-in | |
Power consumption | 20 VA | |
HV power supply used | Commercial frequency alternating current power supply (wire wound high-voltage power supply) |
|
Output voltage | AC7.0kV | |
Allowable output current | 2.3mA | |
Operating Environment | Temperature:0~40℃ | |
Main unit dimensions | 90×220×110 mm(W×H×D) | |
Weight | 3.8 kg | |
Alarm | Non | |
Allowable length for connecting electrodes / wiring | 8 meters in total | |
Attachment | instruction |
SAT series (With alarm functions):
Model | SAT-11 | SAT-20 | SAT-30 |
Input power supply | AC110-120、220-240V | ||
supply(wire wound high-voltage power supply) | |||
Power cable | 1.8m 3P plug-in | ||
Power consumption | 25 VA | 40 VA | |
HV power supply used |
Commercial frequency alternating current power supply (wire wound high-voltage power supply) |
||
Output voltage |
AC7.0kV | ||
Allowable output current |
2.5mA | Max 5.0mA (2 mA, 3.5 mA, 5 mA switch-selectable settings) |
Max 5.0mA (upper and lower limits settable in 1µA units) |
Operating Environment |
Surrounding temperature:0~40℃ | ||
Main unit dimensions | 90×220×110 mm(W×H×D) |
150×230×180 mm(W×H×D) |
150×230×180 mm(W×H×D) |
Weight | 3.6 kg | 6.0 kg | |
Alarm functions | Buzzer and LED indication when a high-voltage abnormality or shutdown occurs |
||
Alarm port output | Confirmed over current and output from the connect port : NO、NC |
||
Rated of alarm connect port |
- | Max voltage: AC250V、DC30V Max current: 5A(NO) 3A(NC) |
Max voltage:250V Max current:5A |
Allowable length for connecting electrodes / wiring |
8 meters in total | Electrode length: 10 m cable length: 12 m |
|
Accessories | Power supply cord (100 VAC 3P-plug) (cord length: 2000 mm) |
Metallic connector for alarm output; protective bushing for high-voltage output; 3-pin adapter |
|
Options | Alarm output cord 5m(OCBL11-5M)、 10m(OCBL11-10M) |
- |