Menu
HDC-AC CABS
Shishido HDC-AC ionizer CABS HDC-AC separate type (out source) type ionier. 30% improvement in static elimination times.

Shishido electrostatic, ltd., ESD solutions and productions.
Eliminostat CABS bar type ionizer. This is a separate type that High voltage is not built-in.


●Ionizer bar is compact. Controller and high voltage power unit designed in separated that helps the product to install in a small space.
●With the new needle error founctions, if you replaced a needle and forget to fit it in the ionizer, it will output an error signal.
 Cleaning function can detect ion creating level.
●With the Charge SNS functioni, it will output a signal while detecting a charged object.
●The minimum length is 110mm and the maximum is up to 1,030mm. 
●While discharged in a short distance, its performacen is higher than CABX as 30%.

Model CABS-AW-xxxx(length)
System
structure
Ionizer bar CABS-DBW-xxxx(length)
Controller CABS-CT1-xxxx(length)
High voltage power unit CABS-TR1
Ion generation method Corona discharge method
Electrical
specification
Input voltage DC24V±5%
Electric consumption 12VA
Output voltage ±8k V0-P
Air tube size Dia φ6mm air tubing
Maximum supplied air pressure 0.5MPa
Supplied air Clean and dried air
Ion balace ±30V or less
Decay time performance 1.0 sec or less
(At distance 300mm, air pressure0.3MPa,
Bar length : 350mm)