Shishido electrostatic, ltd., ESD solutions and productions.
Air controller Piezonizer OAGⅢ-CB
●OAGⅢ-CB control the power supply and Air supply for AGZⅢ gun with connecting outside signal (sensor, foot switch, and other switch) and the pulsed air control.
| Model | OAGⅢ-CB | ||||
|---|---|---|---|---|---|
| Available model | AGZⅢ | ||||
| Power Voltage | 24 VDC (with AC adaptor AC100~240V use AGZⅢ adaptor) |
||||
| Electric Consumption | 200mA（with AGZⅢ gun） | ||||
| indicator | Green: Supply the power and Air to AGZⅢ | ||||
| Supply Air | Clean and Dried air | ||||
| Available air pressure | 0.05～0.7MPa | ||||
| air consumption | Max 500ℓ/min（ANR） （only Contoller） |
||||
| Air output control | 1：CONT：Continuously blow 2：PULSE Hi：High Pulse blow(10Hz) 3：PULSE Lo：Low Pulse blow(5Hz) ※1 |
||||
| Input control | Open the INPUT port: Start to work, Close the INPUT port: Stop to work. |
||||
| Operationg enviroment |
0 to 40℃ /85%RH or less (no condensation) | ||||
| Dimensions | 135×55×75mm（W×H×D） no condensation) |
||||
| Weight | Approx. 490g（control box only） | ||||
| Accessories | Connecting cable with AC adaptor (2m), Connecting cable with AGZⅢ (0.3m), grounding cable, Air tubing (Φ6mm x 3m), Operation manual, | ||||
