Shishido electrostatic, ltd., ESD solutions and productions.
Pencil type ionizer Piezonizer ANZ-SC3 pulse blow.
High frequency air ionizer
●With slim shape as Φ18mm, easy to fit for holding. And its light weight perform long time operation.
With High frequency Corona Discharging method, keep high performance ionization and good ion balance.
●Air supply control with switching while your operation.
●Additional new function as “PULSE BLOW” for Powerful particle blowing (5Hz and 10Hz).
●Buzzer alarm when High voltage line has abnormal.
●The emitter needle can be removed and replaced.
●Applied RoHS.
●HV alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
●Tungsten emitter needle
Tungsten that was specially developed by our company is used in these emitter needles.
●Replaceable emitter needle
Replaceable needle
| Model | ANZ-SC3 | ||||||
|---|---|---|---|---|---|---|---|
| Input Voltage | DC24V (with AC adapter for AC100 to 240V) | ||||||
| Electric consumption | Approx. 400mA | ||||||
| Output voltage | High frequency AC2,500 V | ||||||
| Indicator | Green:Normal condition Red:Abnormal condition |
||||||
| Buzzer Alarm | When H.V. is abnormal, the buzzer is on. | ||||||
| Abnormal signal output | Contact output under abnormal condition (MOS FET Realay Normally close , DC30V less 100mA) |
||||||
| Ion Balance | ±15V or less | ||||||
| Ozone density | 0.04ppm or less (Distance at150mm from the nozzle hole) |
||||||
| Air Supply | Clean and Dry air | ||||||
| Air pressure range | 0.05～0.6MPa | ||||||
| Air consumption | Max 190ℓ/min(ANR) | ||||||
| Air blow | CONT：Continuously blow PULSE Hi：High Speed Pulse（10Hz） PULSE Lo： Low Speed Pulse（5Hz）※1 |
||||||
| Operating enviroment | 0～40℃ / 15 to 65%RH(without Condensation) | ||||||
