| Model | ZappⅡ-L | ||||||
|---|---|---|---|---|---|---|---|
| Input power supply | DC＋24 V±10％ | ||||||
| Electric consumption | 2.4VA | ||||||
| Output voltage | approx. AC 2000 V | ||||||
| Discharge method | High Frequency AC Corona discharge method | ||||||
| Ion balance | ±15V or less at distance 50mm | ||||||
| Alarm output | MOS FET Relay, Normally Opened and Closed contact(NO/NC) Maximum current: 100mA, Voltage: Below 30VDC |
||||||
| Cleaning Check output | MOS FET Relay, Normally Opened contact(NO)(C.C) Maximum current: 100mA, Voltage: Below 30VDC. |
||||||
| Discharge stop input(HV-OFF) | Discharge off: Short circuit to 0V, Discharge on: Open circuit (remained voltage below0.5V) | ||||||
| Ozone level | Below 0.1ppm(Supplied air: 30 ℓ/min(ANR) at 50mm)※1 | ||||||
| Supplied Air | Clean Dried Air | ||||||
| Available air pressure | 0.005～0.1MPa | ||||||
| Airflow supply | Max 50ℓ/min（ANR) | ||||||
| Guaranteed operating | temperature：10～40 ℃ humidity：65%RH or less with no condensation |
||||||
| Main unit dimensions | 87×18×50 mm（W×H×D）only body size | ||||||
| Weight | Approx. 78g | ||||||
| Accompanying items | Manual, Power supply cable(2.5m) Nozzle is optional. |
||||||
| Remark：※1 Under some environment condition, it sometime makes more high level Ozone, we recommend to use ozone-resistant materials around the tip of nozzle. | |||||||
Shishido electrostatic, ltd., ESD solutions and productions.
Piezonizer ZappⅡ-L compact-size Air ionizer
High frequency air ionizer
●For small products that it can’t be supplied with high air pressure.
●Notice: The adjustment of ZappII-L is not same as ZappII, so it cannot use with standard optional nozzles.
Features:
●High performance
Even ultra-low air pressure supply, it keeps high performance ionization to compare with ZappII.
●Integrated designed nozzle
The point of ion creation is around the tip of nozzle and easy installation with flexible seamless piping. Available length of piping is 100mm or 200mm.
●H.V. alarm function
In case high voltage shut down, alarm LED light and alarm output function with non-signaled contact normally open or normally close use.
●Cleaning Check [C.C] function
With detecting the abnormal discharge through the discharge emitter, it shows with C.C alarm LED and it links with signal output as normally open.
