Shishido electrostatic, ltd., ESD solutions and productions.
Winstat BF-X2MB static eliminator blower
HDC-AC with built-in high-voltage power supply.
Slim and light-weight designed desktop ionizer.
●With SSD high technology HDC-AC(Hybrid Digital controlled AC), it performs as less particle attach and long term stability performance.
●Easy maintenance with detachable louver and Emitter needle unit.
●Less maintenance structure designed.
●Safety operation with minute discharge detection and over current detection.
●Wide or straight ionization with two kinds louver part.
●Angle locked function keeps fixed angle direction.
●Safety louver
The easily attachable/detachable louver facilitates product maintenance. The safety mechanism ensures that operation stops automatically when the louver is removed.
●Airflow adjustment
The airflow can be adjusted.
●HV alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
●Fan alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the fan is in the normal operating status.
●Abnormal discharge alarm
Detect the Abnormal discharge from the emitter and indicate with LED alarm.
●Over current alarm
An LED indicator is provided to enable confirmation of over current of ionizer.
●Tungsten emitter needle
Tungsten that was specially developed by our company is used in these emitter needles.
●Replaceable emitter needle
Replaceable needle
Model | BF-X2ME | ||||||
---|---|---|---|---|---|---|---|
Input Power | DC24V (AC adaptor AC100~240V available) | ||||||
CAPACITY | 12VA | ||||||
OUTPUT VOLTAGE | ±7,500V0-p | ||||||
ION BALANCE | Below ±3 V(Distance at 300mm) | ||||||
Air Volume | 1.4~3.5m3/min | ||||||
Air Speed | 1.5~2.9m /s(with Straight Louver at 300mm center) 0.1~0.3m/s (with Wide angle Louver at 300mm center) |
||||||
Ozone Density | 0.004ppm or less(Distance at 150mm) | ||||||
Avilable Environment | Indoor use, 0 to 40℃, 15~85%RH (without condensation) | ||||||
Filter | Pre-filter level | ||||||
Signal Output | Normal: ON H.V Output abnormal or Fan abnormal (Red LED): OFF MOS FET Relay, Normally Close contact output Maximum current: 200 mA Apply voltage: 30 VDC or less |
||||||
Main unit Dimensions | 150×182×76 mm (W×H×D) not including Fixing Bracket and projecting portion |
||||||
Weight | Appox 1.0 kg(with Bracket) | ||||||
Noise Level | 63dB (A) (at 1m distance) | ||||||
Material | Body:ABS. Emitter needle:Tungsten. Bracket:SECC | ||||||
Accessories | Manual, Signal output cable, Cleaning Brush, Wide angle louver | ||||||
Optional Part | Emitter Needle unit :DNU-W85 Filters :OBF-F2MA-1-10(package of 10) |