Shishido electrostatic, ltd., ESD solutions and productions.
Winstat BF-XMB static eliminator blower
HDC-AC with built-in high-voltage power supply.
Slim and light-weight designed desktop ionizer.
●With Plastic body, its total weight perform less 30%.
●Safety operation with minute discharge detection and over current detection.
●Wide or straight ionization with two kinds louver part.
●Safety louver
The easily attachable/detachable louver facilitates product maintenance. The safety mechanism ensures that operation stops automatically when the louver is removed.
●Airflow adjustment
The airflow can be adjusted.
●HV alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
●Fan alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the fan is in the normal operating status.
●Abnormal discharge alarm
Detect the Abnormal discharge from the emitter and indicate with LED alarm.
●Over current alarm
An LED indicator is provided to enable confirmation of over current of ionizer.
●Tungsten emitter needle
Tungsten that was specially developed by our company is used in these emitter needles.
●Replaceable emitter needle
Replaceable needle
| Model | BF-XMB | ||||||
|---|---|---|---|---|---|---|---|
| Input power supply | 24 VDC (with AC 100~240V ACadapter) | ||||||
| Electric consumption | 6VA | ||||||
| Output voltage | ±7000V 0-p | ||||||
| Ion balance | ±10V or less (Distance at 300mm) | ||||||
| Air Volume | 0.7～1.2m3/min | ||||||
| Air speed | 1.2～1.9m/s (with Straight Louver at 300mm center) | ||||||
| 0.7～1.2m/s (with Wide angle Louver at 300mm center) | |||||||
| Ozone density | 0.004ppm or less (distance 150 mm) | ||||||
| Operating Environment | 0 to 40℃ / 15 to 85% RH (no condensation) | ||||||
| Filter | Pre-filter level | ||||||
| Output signal | Normal: ON, Abnormal (HV alarm or fan alarm with Red LED light): OFF MOS FET Relay, Normally Closed contact. Maximum current: 200mA, Voltage: Below 30VDC. |
||||||
| Main unit dimensions | 104×126×67 mm (W×H×D) not including projecting portion | ||||||
| Weight | Approx. 560g (including stand) | ||||||
| Noise | 51 dB(A) (distance 1 m) | ||||||
| Accompanying items | Operation manual, AC adapter, signal output cable, cleaning brush, Wide angle louver | ||||||
| Optional parts | Emitter needle unit :DNU-W60 Filters :OBF-FZA-1-10(package of 10) |
||||||
