NITTO SEIKO Screw Feeders
DF200 Disc Type Micro Screw Feeder
●Solution for precision and micro screws. Simple mechanism using a disk for singulating and escaping. High efficiency is achieved because of very low incidence of jamming. DF200 can reliably feed precision screws by rotating disc. It eliminates screw jamming and prevents interruption of operation.
●Precision screw, micro screw feeding
0.6 mm dia., flat head, shortlength, micro screw, and other screws with captive washers can fe fed.
●Easy operation
Disk can be changed to feed different diameter screws. No other adjustments are required. Any screw with the same shaft diameter, no matter head-type og thread type, can be fed with the same disk.
●Installation in automatic lines
Efficient feeding prevents line stoppage due to feed faults. Start input and screw escapement permission signals can also be used.
● For feeding precision and very small screws and rivets
● For feeding precision screws that were difficult to feed by conventional feeders, such as thin-head screws, short screws and screws with a washer
| Model | DF200 |
|---|---|
| Applicable screws | Nom. dia. 0.6－2mm Length max．5mm |
| Screrw feeding capacity | max．20－30 pcs/min |
| Basket capacity | Approx. 50ml （1.4×3mm pan head screw is appox.） （3000 pcs） |
| Power suppy | AC100~240V 50/60Hz 1-phase |
| Power capacity | max．50VA |
| Working air pressure | 0.4~0.5Mpa |
| Machine weight | Approx. 4.5Kg |
※While ordering, please contact us your screw size.