NITTO SEIKO
Singlespindle screw driving unit
Feedmat FM510C, FM810C and FM1010C
Screw holding system : By chuck
FEEDMAT FM510C (For M2~M5) is a unit to be mounted on a line or robot. Compact, lightweight and easy to use. Usable in all directions, greatly contributing to automation and labor saving of screw-fastening.
FEEDMAT FM810C (For M2~M8) is a unit to be mounted on a line or robot. Compact, lightweight and easy to use. Usable in all directions, greatly contributing to automation and labor saving of screw-fastening.
FEEDMAT FM1010C (For M8~M12) is a unit to be mounted on a line or robot. Compact, lightweight and easy to use. Usable in all directions, greatly contributing to automation and labor saving of screw-fastening.
| Model | FM510C | FM810C-01 | FM810C-02 | FM1010C | ||
|---|---|---|---|---|---|---|
| Applicable Screws |
Category | FM510C、FM810C-01：Small screw, Tapping screw FM810C-02、FM1010C：Bolt, etc. |
||||
| Nom Dia. | 2~5mm | 5~8mm | 8~12mm | |||
| Length | Max 20mm (Option：25mm) |
Max 30mm (Option：40mm) |
Max 40mm (Option：60mm) |
|||
| Tightening torque | 0.3~4.0 N‧m | 4~22 N‧m | 10~70 N‧m | |||
| Driver | KX Driver、NX Driver | |||||
| Driver stroke | 50, 100 (Option： 150) |
100, 150, 200 | 100,150,200 | |||
| Screw holding system | chuck | |||||
| Error detection | Mis-fastened screw, Low screw in screw feeder,Height check by encoder pulse | |||||
| Working air supply | 0.4~0.5MPa | |||||
| Power supply | 1-phase AC200V (Option : 100V) | |||||
| Machine weight | 4.5kg | 9.0kg | 12.5kg | 21.0kg | ||
| Screw feeder | FF503H (For FM510C)、FF801H (For others) | |||||