Uni-ram BC30G, DC100GN For lithographic printer Solvent Recyclers for the Automotive Industry
●This unit is certifi ed under UL standard 2208 and CSA standards C22.2 No. 30 and No. 88 for use in non-hazardous locations as well as for use in hazardous locations Class 1, Division 1, Group D– T2C and Class 1, Division 2, Group D -T2C.
●Explosion proof construction and intrinsically safe electric circuitry.
●Computer controlled with many built-in safety programs including temperature control of all critical points including tank, condenser and fan motor.
●Self Diagnostic error messages are displayed on the Display Panel.
●Dual lid cover system.
●Rugged stainless steel construction for long service life. Non corrosive fluid passageways.
●Drum mixer for used blanket wash drum.
●With Water Separator
| Model | BC30G | DC100G | |
|---|---|---|---|
| Power source | 1-phase AC240V 3.0Kw/hr | 1-phase AC240V 5.0Kw/hr | |
| Air pressure 0.6MPa | Air pressure 0.6MPa | ||
| Explosion proof construction | Explosion proof construction and intrinsically safe electric circuitry. |
||
| Method of recycling | Heating、cooling、automatic control | ||
| Method of control | Computer controlled with many built-in safety programs including temperature control of all critical points including tank, condenser and fan motor. |
||
| Continuously running times | 24~30 Hours ( 2 recycing cycle) | ||
| Max temperatue set point (℃) |
240 | ||
| Recycling spped(ℓ/hr) (for reference only) |
Approx. 2～4 | Approx. 6～10 | |
| Tank capacity(ℓ) | 25 | 80 | |
| Max usable capacity(ℓ) | 16 | 60 | |
| Dimension(cm) | 72 × 44 × 110 | 107 × 59 × 120 | |
| Mass(kg) | 80 | 205 | |
| Material | Distillation Tank |
Stainless steel | |
| Condenser | Stainless steel | ||
| Tubes | Stainless steel | ||
| Housing | Stainless steel (except rear plate) | ||