FUSO SEIKI Magic-cut, e-mist
●Increases speeds up in cutting process.
●Provides effective lubrication and chips removal.
●MQL (Minimum Quantity Lubrication) is achieved.
●Extends tool life up by effective cooling.
●Save oil cost and washing cost
●Easy to set up.
Details:
Giving Edge to metal working.
The most effective cooling, fine lubrication and complete chip removal provided by the strong jet mist directed to tool contact point with the force of compressed air.
Tool life extended
In stainless steel drilling, extends tool life up. Saves time to resharpen cutting tool or replace cost.
Speeds up
Speeds and feeds increased in cutting process, because of the sprayed lubricant carried to critical cutting point.
Free of lubricant and chips
Clean operation provided at the workshop by the strong jet blowing. Washing process decreased from the workpiece. the finely controlled mist tends to dry on the chips and workpiece.
Application:
Because Magic-Cut e-Mist makes liquid to cold mist by the power of air and it sprays it, it does 3 actions (lubrication, cooling, and chips removal ) at the same time. Moreover, you can use it properly by controlling liquid and air according to a semi-dry lubrication (MQL), a mist lubrication and a coarse spray for tapping.
Excellent finish and great cost down.
About 1/3 of costs put on cutting is callwd a cutting oil. Wear-and-tear expenses of cutting oil, disposal expense of a very little cutting fluid if it is e-Mist. Even when washing us necessary, the washing cost is greatly reduces. Like in cold wind cooling, the problem of rough degree of finish and the short life of the tool are not caused.
●Full Set product no. e-mist
How to Select:Please confirm Name and Indication as below. (Example :EM1-CM-S80 or EM4-UV-Z40)
Main | No. of line nozzle |
Air valve | Fixing Amounting |
Type of line nozzle | Length of line cm |
---|---|---|---|---|---|
EM | 1~4 | -C:Foot air valve C-50E -U:Cam air valver U-4E |
M:Magnetic base V:Vise X:Without |
-S:Soft copper -Z:Flexible line |
20、30、40、50、60 ( S type is avaliable to select 80 cm) 40 is standard. |
●Atomizer Parts
How to Select:Please confirm Name and Indication as below. (Example :EM1-AT-S80、EM1-AT-Z20)
Main | No. of line nozzle |
Middle | Type of line nozzle | Length of line cm |
---|---|---|---|---|
EM | 1~4 | -AT | -S:Soft copper -Z:Flexible line |
20、30、40、50、60 ( S type is avaliable to select 80 cm) 40 is standard. |
●Type of line nozzle part
How to Select:Please confirm Name and Indication as below. (Example :FN-S80、FN-Z20)
Main | Type of line nozzle | Length of line cm |
---|---|---|
FN | -S:Soft copper -Z:Flexible line |
20、30、40、50、60 ( S type is avaliable to select 80 cm) 40 is standard. |