●ST-5  Both fan and round pattern
　Standard model ST-5.
　Ideal for applying lubricants to die cast machines and during injection molding.
　By turning the Pattern Adjuster, pattern and size can be selected between Round, Fan and intermediate positions.

●ST-5SK  small round pattern model
　Small round pattern is good for small area marking and coating a narrow line.
　You can coat a small narrow line by moving workpieces or automatic spray guns.
　While coating a small area or output a few liquid, masking process is not required.
　The minimum pattern is φ2mm.

●ST-5P  Scatter-preventive, Both fan and round pattern model
　While atomizating press forming oil, the model will keep the atomizating air pressure in a low pressure,
　it brings to avoid scattering.
　If the atomizating particle needed to be bigger, please uses in 0.2~ 0.25 MPa. 

●ST-5R  Round pattern
　Used for marking or painting small objects.
　For spraying round pattern only.

●ST-5RW  Wide-Angle Round spraying
　Outstanding in terms of efficiency of paint adhesion to inner concave surfaces.
　Spraying area (Coating area) is bigger than ST-5R.
　Prevent the air cap set from clogging up.

●ST-5L  Long-nosed with round pattern model
　Used for straight spraying of round patterns at a distance such as for die cast parts or cooling a mold.
　Not suitable for paints or viscous liquids.
　Nose length : 50mm.