URYU SEISAKU DRILLS ( "C" is Cornner type and "A" is Angle type)
●Exhaust air passes through muffler in rear side. Comfortable and lower noise level.
| Model | Drilling Capacity mm |
Free Speed (about) rpm |
Nominal Chuck Size mm |
Type of Spindle |
Overall Length (about) mm |
From Center to Outside mm |
Weight with Chuck (about) kg |
Air Consumption m3／ min |
|---|---|---|---|---|---|---|---|---|
| UD-50S-45A | 4 | 23000 | 8 | 3/8-24UNF | 200 | 21.0 | 0.70 | 0.40 |
| UD-50S-22A | 4 | 5000 | 8 | 3/8-24UNF | 210 | 21.0 | 0.85 | 0.40 |
| UD-60S-29C | 8 | 2200 | 8 | 3/8-24UNF | 205 | 21.0 | 0.83 | 0.40 |
| UD-60S-15C | 8 | 2900 | 8 | 3/8-24UNF | 227 | 22.5 | 1.05 | 0.50 |
※Recommended Air Pressure : 0.6MPa
※Air Hose Size (Inside Diameter) : 9.5mm