UEC-4800 : LCD-panel and key touch
UEC-4800TP : LCD with Touch panel
● Programming is easy on front touch panel. You can also upload your programme from PC.
● UEC-4800(SD) can be used with a various types of transducerized tool.
a. Oil-Pulse Tools fitted with a Magnetostrictive Transducer UA-MC series, ALPHA-MC series, UEP-MC series (UEPD Driver is required separately.)
b. Oil-Pulse Tools fitted with a Strain-Gauged Transducer U-EC series, UX-EC series
c. Pneumatic Tools fitted with a Strain-Gauged Transducer UAN-M series, UOW-M series, UNR-NT series
● High Reliable Torque Control & Monitor
● Ethernet (TCP / IP) capable.
Functions
● You can choose between Torque Control and Monitor. You can detect various errors and control the job with fastening counter.
● You can see‘Torque Wave’ data on both front touch panel and PC.
● UEC-4800(SD) can be used for 8 different fastening applications.
● Front panel, PC display or buzzer will tell you Input / Output
(terminal blocks & tool wiring) checks and Errors.
● UEC-4800(SD) memorizes cumulative fastening numbers and pulse numbers from the start of operation.
● UEC-4800(SD) memorizes max. 12,000 fastening data. Standard deviations, Cp value, Cpk value can be analyzed instantly from the stored data within the controller. When you connect UEC-4800(SD) to PC, you can graph the statistical data.
● By using Input / Output terminals UEC-4800(SD) can be interlocked with the production line.
| POWER SUPPLY | AC100V〜240V ±10% |
|---|---|
| POWER FREQUENCY | 50/60Hz |
| NOISE PROTECTION | 1200V 1μS(according to noise simulator) |
| INSULATION PROTECTION | DC500V Over 10MΩ |
| AMBIENT TEMPERATURE | 0〜50℃(non-freezing) |
| AMBIENT HUMIDITY | Under 90%RH(no dew) |
| POWER CONSUMPTION | Approx. 30VA |
| WEIGHT | Approx 3.4kg |
| DIMENSIONS mm | 265(D) × 222(W) × 120(H) |
| MAIN FUNCTIONS | Torque Monitoring / Control + Fastening Counter |
| PARAMETER SETUP | Manual Input on Front Touch Pannel |
| Personal Computer (with setup software) | |
| DISPLAY | Torque Resolution ±2048（12Bit A/D）LCD（25 characters x 15 lines） |
| Contents：Workpiece No.、Count down、Fastening time、Pulse numbers | |
| １ character(DPM)：Workpiece No. 4 characters(DPM)：torqrue data | |
| LED | COUNT Lamp : OK (Green) / NOK, NG (Red) |
| TORQUE Lamp : LOW (Yellow) / OK (Green) /HIGH (RED) | |
| INPUT TERMINAL SIGNAL |
Operation Voltage/Current : DC24V/aprox. 10mA |
| 6 terminals (free format), VALVE | |
| OUTPUT TERMINAL SIGNAL |
Contact Capacity : AC:125V, 0.3A, DC:30V, 1A |
| 6 terminals (free format), VALVE |
