UTM-1500(PS): Pressure Sensor Incorporated type
By connecting the TM signal hose from a tool to the coupler at the back of the controller, the pressure sensor incorporated in the controller converts the air pressure signal into the electric signal.

UTM-1500(CN): Connector Incorporated type
By connecting the pressure sensor (external pressure sensor assembly) attached to a tool to the connector at the back of controller, the controller supplies the power and loads the analog signal.

Features
• Applicable to the pneumatic tools such as the oil pulse wrenches, impact wrenches etc., or the electric tools, UDP-TA series. (Tool should be modified into the TM type because the controller basically detects the back pressure.)
• Counting down the fastening number, error proofing by the display and buzzer.
• Easy parameter setup the controller by front key switches followed to the front panel LCD. (It is possible to setup the parameters through a personal computer as well.) *TM convertible model : Various kinds of tools can be converted into TM type. Please ask your local URYU distributor for details.

Functions
• Easy setup for the pressure values by the automatic setup future.
• Up to 1500 tightening time and judging data points stored.
• Each buzzer volume level of fastening recognition, panel and NOK operation adjustable.
• Work select feature available for four different works with different numbers of fasteners.
• By equipping the external input/output terminal block (free format), inter lock with the line is possible.
• Parameters receivable/ transmittable, and wave data, memory data and the total numbers of fasteners receivable through PC.(Total numbers of pulse receivable in usage of the external pressure sensor assembly.)
• Measurement and display of the fastening time possible for the shut off tools.
• External pressure sensor assembly equipped for UTM-1500(CN) enables to count the pulse number so that the pulse number control becomes possible other than the fastening time control. (The pulse number cannot be detected sometimes depending on a tool or working conditions.)
• Total maintenance determined the total numbers of fasteners or pulse possible. (external pressure sensor assembly needed.)

* TM convertible model : Various kinds of tools can be converted into TM type. Please ask us for details.
UTM-1500A is the 115V use, while UTM-1500E is the 230V use.