Energy saving technology & innovation booster「Energy Saving Technology & Innovation Booster」

Features
 ・Low noise
・Low vibration
・Clean air and long life
・The world's first oil-free booster compressor

Applications
・Boosting of compressed air and nitrogen gas pressures
・Substitute for booster valves for energy saving
・Pressure boosting in case pressure is insufficient because of a decrease in air line pressure aimed at saving energy

Introduction Example：Hino Motors, Ltd.
（For Details：CSR website "CSR → Environmental Performance → Environmental Activities → CO2 Emissions Reduction at Production Plants"）

2015/07/15 Added「movie」, please click the [movie] tag in above.

Lowering pressure for energy saving
Why not lower the supply pressure of the compressor?
While 60 to 70% of the equipment used in a manufacturing plant is designed to operate on low pressures, pressures as high as 0.7 MPa are typically supplied.

Lowering the supply pressure of the compressor can bring these energy-saving effects:
●Energy-saving effect ①
The power consumption of the compressor decreases.
●Energy-saving effect ②
The air consumption (including air leaks) decreases.
●Energy-saving effect ③
The load of the compressor decreases.

Lowering the supply pressure by 0.3 MPa
leads to an energy saving of about 20%!

CO2 emissions are cut by about 50 tons annually!
Three 37-kW compressors are used.
Operation time: 4,000 hours/year
Emission factor: 0.000555t-CO2/kWh
Calculated using the above conditions. 

Introducing a booster to compensate for pressure insufficiency after lowering the pressure
Lower the pressure of the compressor
 ↓
Introduce a booster to compensate for pressure insufficiency

Features
The world's first oil-free type
The world's first oil-free compact booster compressor
The compressor can be installed easily even in narrow spaces where it was formerly difficult to install.

Low noise and low vibration
The closed-type compressor generates no valve noise. It is very quiet.

Long life
The compressor main unit requires intermediate maintenance at intervals of 10,000 hours.

A microcomputer board is included (EFBS15).
Pressure can be set arbitrarily.

Compact structure with an internal pressurizing mechanism (*) (EFBS04/07)
Compression loss is reduced to ease the motor load. No leak occurs during boosting.
Since the compressor can maintain gas purity, it is recommended for nitrogen gas boosting as well.