product description
Home/ Products/ ANEST IWATA /Recipro Oil-Lubricated
Menu
ANEST IWATA
ANEST IWATA CLP Recipro compressor
ANEST IWATA Air Compressor -Oil-Lubricated
ANEST IWATA CLP Recipro compressor.
The package type is very quiet.

Applications
● Source of air for operating general factory equipment
● Leisure services
● Fiber industry
● Others

Features
「Four cutting-edge technologies」
● Low noise: Industry's top-class low noise level. All 2.2- to 3.7-kW models operate more quietly than before.
● Low vibration: Improvement of 2 to 5% in vibration over previous models.
● High efficiency: Improvement of about 5% in efficiency over previous models.
● Low oil consumption: Industry's top-class low oil consumption. A 5% decrease in oil consumption has been achieved from previous models.

Advanced functions to meet professionals' expectations
● Functions such as microcomputer control, remote control and multiple unit control are available as options or built-to-made models.

Energy-efficient and economical
● The automatic start-stop system using a pressure switch enables energy-efficient and economical operation.

●ANEST IWATA CLP Recipro compressor (Voltage 200V)
Model Motor
rated
output
kW		 Control
pressure
Mpa		 Air
delivery
ℓ/min		 Air
tank
ℓ		 Noise level
dB(A)
front 1.5m		 Dimensions
mm
(W x L x H)		 Mass
kg
CLP15E-8.5 1.5 0.7~0.85 170 25 53 695×585×840 95
CLP22E-8.5 2.2 295 39 50 890×655×985 140
CLP37E-8.5 3.7 415 53 890×655×985 160
CLP55E-8.5 5.5 605 70 55 1170×745×1100 255
CLP75E-8.5 7.5 845 55 1230×870×1100 305
CLP110E-8.5 11 1215 75 58 1230×925×1100 350
CLP22E-14 2.2 1.15~1.4 235 39 51 890×655×985 145
CLP37E-14 3.7 390 54 890×655×985 160
CLP55E-14 5.5 570 70 56 1170×745×1100 255
CLP75E-14 7.5 740 56 1230×870×1100 305
CLP110E-14 11 1075 75 59 1230×925×1100 350


●ANEST IWATA CLP Recipro compressor with air dryer (Voltage 200V)
Model Motor
rated
output
kW		 Control
pressure
Mpa		 Air
delivery
ℓ/min		 Air
tank
ℓ		 Noise level
dB(A)
front 1.5m		 Dimensions
mm
(W x L x H)		 Mass
kg
CLP15E-8.5D 1.5 0.7~0.85 170 25 53 695×585×1000 115
CLP22E-8.5D 2.2 295 39 51 890×655×1120 160
CLP37E-8.5D 3.7 415 53 890×655×1200 185
CLP55E-8.5D 5.5 605 70 55 1170×745×1530 325
CLP75E-8.5D 7.5 845 55 1230×870×1480 380
CLP110E-8.5D 11 1215 75 58 1230×925×1480 425
CLP22E-14D 2.2 1.15~1.4 235 39 51 890×655×1200 175
CLP37E-14D 3.7 390 53 890×655×1200 185
CLP55E-14D 5.5 570 70 56 1170×745×1530 325
CLP75E-14D 7.5 740 56 1230×870×1480 380
CLP110E-14D 11 1075 75 59 1230×925×1480 425
● Air delivery is discharged air volume converted into atmospheric pressure (reference).
● Noise level is measured in an anechoic room at full load operation.
● When the air compressor is used intermittently, we recommend use of a water
separator kit which is available as an optional part for models from 2.2 to 11 kW.
● Air dryer pressure dew point : 15℃ or below