● Provides a flat application pattern with an even layer of particles.
● Provides a wide pattern even at a low flow rate.
● Delivers higher atomization performance by lowering the inlet pressure of the spray gun.
● Offers higher coating efficiency in short distant spraying (150 mm or so).
| Model | Nozzle orifice bore φmm |
Atomizing air pressure Mpa |
Spray distance mm |
Pattern width mm |
Fluid output mℓ/min |
High atomization | General-purpose atomization | Remarks | Applications |
| LPH-50-S5 | 0.4 | 0.20 | 400 | 150 | 20 (0~20) |
● | With one-touch adjusting knob | For interior coating |
|
| LPH-50-S9-04 | 0.4 | 0.20 | 0～15 | ● | |||||
| LPH-50-S9-06 | 0.6 | 0.20 | 0～22 | ● | |||||
| LPH-50-S9-10 | 1.0 | 0.20 | 0～35 | ● | |||||
| LPH-101-124LVG | 1.2 | 0.20 | 200 | 150 | 40 | ● | — |
For exterior or industrial coating | |
| LPH-101-S18 | 1.0 | 0.20 | 150 | 200 | 40 | ● | With one-touch adjusting knob | ||
| LPH-101-S19 | 1.0 | 0.20 | 150 | 200 | 40 (0~80) |
● | |||
| LPH-101-S23 | 0.5 | 0.20 | 150 | 200 | 40 | ◎ High atomization |
For specific coating material manufacturer |
||
| LPH-101-S27 | 0.8 | 0.20 | 150 | 200 | 40 | ● | |||
| LPH-400-S1 | 1.2 | 0.15 | 150 | 300 | 45 | ● | |||
| LPH-101-S34 | 1.0 | 0.20 | Fine flow control can be exerted. (comparison with LPH-101-S19) (Fluid output: 0 to 50mℓ /min) |
● | |||||